If you drive a car, ride a bike, or even operate machines that use tyres, you will get a puncture at some point. The terrible experiences that come with having a flat tyre range from the drama of having your tyre deflating while you are driving at 100 on a dual carriageway to having a flat tyre in the middle of nowhere at a very odd hour.
There are days you may be lucky enough to notice the flat tyre before you begin your journey. However, you may not always get that lucky.
At best punctures are a hassle, but at worse, they can be the most dangerous experience. It?will take some time to get your punctured tire sorted, and it will also cost you money.
Sometimes you may be lucky to get a puncture that can easily be repaired and only cost you a small amount of money, but punctures can often lead to irreparable damages to your tire, and may cause you to replace either the tire on the inner tube sooner than expected.
Below are a few tips on how you can avoid having a punctured tyre
1. Be careful where you drive
The first step to preventing punctures is avoiding places where you know they are likely to occur. Such areas include where there is debris on the road or construction sites.
You should also avoid driving over obvious dangers such as bits of metal, broken glass, or any item on the road that you cannot identify.
You may not have paid attention to where you position your car on the road, but that also is very important. There are certain areas where dirt is more likely to build up; areas like hard shoulders, the centre of the road, and close to curbs.
You can save yourself the trouble and protect your tires by ensuring that you avoid such areas, especially wherever you spot and accumulation of debris.
2. Check your tread
Many drivers are in the habit of paying little or no attention to their tyres until there is damage. Tyres that are worn out can get more punctures than tyres that have good threads. Always check your tire and change them before they reach the legal minimum.
3. Check your tyre pressures often
Unlike tyres running at the right pressure, both over-inflated tyres and under-inflated tyres are very susceptible to puncture.
Things like bumps or potholes can easily damage an over-inflated tyre while an under-inflated tyre will suffer more friction which will cause it to wear out faster. Check your tyre pressure at least once a month to avoid either of the above scenarios.
4. Avoid bumping into the curb
When trying to park against the curb, it is common to rub your tyre along it as you attempt to get into place. You need to take extra care because such friction can damage the sidewalls of your tire and that will weaken the structure and also lead to punctures.
5. Always watch the road ahead
One other major cause of tyre punctures is driving without paying attention to potholes on the road. Always keep an eye out for potholes especially in the dark. A good driver should be able to anticipate the road ahead and avoid hitting potholes where possible.
6. Do not Overload your Vehicle
Every car has a maximum load rating. While for some people this might not be an issue, always bear in mind that if you overload your car, you might get close to that rating or probably exceed it.
One of the cons of driving with an overloaded vehicle is that you put your tire under greater strain and that will make them more susceptible to getting a puncture.
Punctures are always annoying even if you drive a car that has run flat tires. The best run-flat tires can do for you is allow you to drive a short distance so you can safely get home or reach a place where you can get your puncture repaired.
7. Invest in a tyre puncture sealant
A lot of drivers do not know the importance of investing in tyre puncture sealants. We can’t blame them much because there is little or no awareness on how valuable a tyre puncture sealant can be. Worse still, not every country in the world has easy access to tire puncture sealants.
Tyre puncture sealant usually comes in pressurised cans and with different brand names. One of the most commonly known brand names is Tyre Armour. A good tyre puncture sealant can prevent punctures up to 15 mm in cars, bicycles, motorbikes, vans, and 4×4’s.
How do tyre sealants work?
Whenever your tyre has a puncture, what happens is that the air inside the tyre attempts to leak out and that would force the sealant into the hole. Once the sealant can penetrate the wound, fillers and fibres will interlock to form a permanent and flexible plug and prevent further loss of air.
Pros of Tyre puncture sealants
One of the most significant pros of using a tyre puncture sealant is convenience. Tyre puncture sealant does not require you to stress much, all you are required to do is attach the nozzle of the sealant container to the tyre valve system and apply the content into the tyre.
What happens next is that the content will be spread to the puncture and ultimately seal it; allowing you to drive without bothering about removing the tire. The beautiful part is that the entire process of application takes only a minute or two.
People who are in a hurry or have a punctured tyre in a dangerous place do not have to bother about getting out of their car to have their tire changed. Even though tyre puncture sealant takes away your worries about having a punch attire it is always best to have a spare tire in your car.
Even though you have applied a tyre puncture sealant, it is always safe to get a traditional patch afterwards and make sure that the patch is gotten from a reputable tyre servicing firm. You can get tyre maintenance tips as well as purchase good sealants from websites like tyrehub.ng.
The prices are reasonable
Considering the benefits of a tyre puncture sealant the prices they come at are usually reasonable. Feel free to share other tips as well as your experiences with a punctured tyre in the comment section. We look forward to hearing from you.